Publicidad
Idiomas disponibles
Idiomas disponibles
7. BALANCE ADJUSTMENT METHOD OF CEILING FAN.
a. Switch on the ceiling fan, if it wobbles, switch it offand stick one of the balance magnetic to
any position of the top side of blade plate. (Fig.12)
b. Switch on the fan again to see if there is any improvement.
c. lfthere is no improvement, take offthe balance magnet and stick it to other position of the
top side of blade plate and repeat the testing until fan works well.
d. Remove the balance magnet and stick the balance block to the position of the magnet, then
turn the power on, the fan will work well.
la alimentación, el ventilador funcionará bien.
REMARKS:
1.
The first 24 hours after installation, it is normal to notice a slight noise during fan operation. After
this adjustment period, the rumor will disappear
2. The light of the fan turned off through the remote control remains in stand-by mode. It will be
completely off if power is cut off through the wall switch.
3. If you are installing the fan in a false ceiling made of plaster, Wood or metal, the noise of the fan
may be amplified due to the existing air chamber. We recommend adding an insulating material
in the ceiling chamber to mitigate the transmission of sound.
15
Publicidad
