Adjusting The Flame - CAN FL Serie Manual De Instrucciones

GAS HOB UNITS COMBINED WITH RECESSED SINK ▪
ATTENTION!
The burner must be lit without any pan or any other object on the hob unit above the burners.
PROHIBITION!
Never close the glass lid of the hob when the device is in use or still hot.

ADJUSTING THE FLAME

Check that the flame is regular and stable.
To adjust the flame, turn the knob to the desired
position (MIN or MAX).
The knob can also be placed in the middle, between
the maximum and minimum position. Do not place
the knob between the maximum and "off" position.
ATTENTION!
If the flame is irregular, check that the
burner spreader and caps are positioned
properly.
ATTENTION!
The flame must not come out from the
bottom of the pan. Use only vessels with
a flat bottom.
66
adjusting the flame
FL series
flame adjustment range
90°
160°