Realtree Weston 07-4101-RT Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
1. Using an Allen Wrench and 2 Leg
Screws and Lock Washers, attach the
Support Leg to the Lower Housing
(Figure A). The C-Clamp should be
facing inward.
2. Install the Chute to the Top
Housing using an Allen Wrench
and the 2 Chute Screws and Lock
Washers (Figure B).
3. Attach the Countertop Protector
Pad to the Support Leg and the
Protector Cap on the top of the C-
Clamp (Figure C).
4. Open the C-Clamp by turn the
screw clockwise to open the C-Clamp.
Place the C-Clamp onto the work
surface, then turn the screw counter-
clockwise until firmly tightened.
Lower
Housing
Support Leg
Chute
Top
Housing
Allen
Wrench
Countertop
Protector
Pad
-5-
Figure A
Allen
Wrench
Leg Screws (2) &
Lock Washers (2)
Figure B
Chute Screws (2) &
Lock Washers (2)
Figure C