PALLISER PALI 260340560 Instrucciones De Montaje página 8

ARM INSTALLATION
Follow the instructions below on how to install the arms.
01
Take hold of an arm and ensure that the
arm's attachment brackets are aligned with
the base unit's brackets.
03
Push down firmly on the arm to connect it
to the base unit's brackets. Repeat for the
other arm.
7 / 42
Keep note of the FRONT
sticker's arrow direction
before you install.
ARM REMOVAL
For when you need to remove the arms,
follow the same procedure as stated on this
page, but in reverse.
1. Firmly grab hold of the front and back
of the arm and pull it off by rocking
the front and back sides until it loosens
from the unit's brackets.
2. Set them aside for when you need to
install them again.
02
Slide the arm brackets
into the base unit's
brackets.