LANDMADE Peyto Instrucciones De Instalación página 5

6 PREPARING THE TUB
• Remove the tub from its pack and dispose of the latter according to local by-laws.
• Place the tub in its installation position and keep it clear from the floor using wooden blocks.
• Install the drain kit on the tub as shown in Fig� 3, following the instructions of the
manufacturer of the drain kit�
7 INSTALLING THE PIPING
CAUTION:
Risk of injury.
Taps mounted on the edge of the tub that can inadvertently be used as a means of support are
not appropriate or safe for this operation�
CAUTION:
Risk of damage.
Make sure gaskets are applied to all the drain connections�
• Connect the trap to the plug surround as per the drain kit manufacturer's instructions�
• Open the hot and cold water taps and check all the connections for leaks�
• Fill the tub with water and check the drain connections for leaks�
• Fill the tub to the overflow and check for leaks.
• Remove the wooden blocks and apply silicone around the base of the tub�
6
Fig.3