Kobalt SGY-AIR264 Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
7. Wrap 3-5 layers of sealant tape on both male
plug ends on the leader hose (C). Attach one
end into the air inlet (E) using a 9/16" (14mm)
wrench to tighten.
OPERATING INSTRUCTIONS
To extend air hose (B), pull out the manual
brake pin lock (J) and turn 90 degrees
until it locks into the short slot.
To lock the hose reel in place, pull the hose to
the desired length, pull the manual brake pin
lock (J) out and turn 90-degrees until it will lock
into the longer slot.
NOTE
Make sure pin is aligned with one of the
3 slots on the drum.
6
7
C
Unlock
J
Lock
J