Descargar Imprimir esta página

CENSAT WATT Manual De Instrucciones página 74

Publicidad

Idiomas disponibles

Idiomas disponibles

PARAMETER
Heat input (min-max)
Nominal heat output (min-max)
Reduced heat output
CO concentration at nominal reference (13% O )
CO concentration at reduced reference (13% O )
Nominal efficiency
Reduced efficiency
Pellet consumption (min-max)
Flue gas flow rate (min-max)
Draft advised (min-max)
Flue gas temperature (min-max)
Tank capacity
Recommended fuel
Diameter smoke outlet tube
Diameter air intake
Nominal voltage
Nominal frequency
Power consumption max
Power consumption at nominal power
Power consumption at reduced power
Stove weight
N° Test Report
It is recommended that the control of emissions after installation.
Pellet
The pellets are cylinders of compressed wood, produced from sawdust and wood processing (chips and
sawdust), generally produced by sawmills and carpenters. The binding capacity of the lignin
contained in wood, allows to obtain a compact product without adding additives and
foreign chemicals to the wood, is therefore obtained a natural fuel with high yield.
The use of expired pellets or any other unsuitable material can damage parts of the
thermostove and impair proper operation: this can lead to the termination
of the guarantee, and its producer responsibility.
For our products use pellets diameter 6 mm, length 30 mm and
a maximum of 8% and A1 certified according to the UNI EN ISO
17225-2 standard. Keep the pellets away from heat sources and
not in humid environments or with explosive atmosphere.
page 22 of 42
UNIT OF M.
kW
kW
kW
mg/m
3
2
mg/m
3
2
%
%
Kg/h
g/s
Pa
°C
Kg
(ø x H) mm
mm
mm
V
Hz
W
W
W
Kg
MIGNON6 / PETITE6
3,3 - 7
3 - 6,2
2,5
185,6
633,2
88,5
89,8
0,7 - 1,4
3,2 - 4,5
5 - 8
124 - 169
11
pellet 6 x 30
80
50
230
50
300
53
62
45
2004858

Publicidad

loading