Britec AIR FRESH 10 Instrucciones De Uso página 30

Filling the water tank
1. Please check fi rst on the back of the appliance whether the rubber plug
is fi rmly inserted in the water outlet and closes it so that the water tank
cannot accidentally leak out.
2. Fill the water tank on the top of the appliance. Open the cover on the top
of the unit and pour in clean water, checking the level on the front of the
water tank:
MIN-mark:
The water tank must be fi lled to above the MIN mark so that the pump can
function properly
MAX-mark:
The water tank must not be fi lled over the MAX mark, otherwise water could
enter the inside of the appliance and thus damage electronic parts.
3. Make sure the water tank is not damp or wet on the outside, and if so,
wipe it dry.
4. Close the cover again.
31