Duronic STM11 Manual De Instrucciones página 11

3. Push the tank release button(5) to
release the water tank(7) from the main
unit(6).
4. Remove the cap from the tank, fill the
tank with deionised or distilled water. Fill
to the max line.
Close the cap on the water tank.
5. Place the water tank back into the main
unit and ensure that it clicks into place as
this means the tank is securely back in
the right place.
Note:
If you are using this mop for the first time, or for the first time after a period
of not using it, you will need to wait a minute or two for the water to start
traversing through into the main unit.
11
5
7
6