Installation; Power Source - LDLC Pro Touch 27 Manual Del Usuario

INSTALLATION

 This machine should be installed adjacent to an easily pluggable AC power
socket.
 For the sake of safety, we suggest that suitable wall-mounted bracket or base
be used.
 In order to prevent injury, this machine shall be placed on a stable and level
surface or fixed on a firm wall.
 DO NOT place this machine in places with mechanical vibration.
 DO NOT place this machine in places where insects are accessible.
 DO NOT install this machine directly opposite to air-conditioner, otherwise its
inner panel may be dewed and cause failure.
 DO NOT place by heating, chimney, expose to direct sunlight, or any direct heat
source. Failure to comply with this warning may lead to damages on screen and
increase the risk of fire.
 DO NOT install in a passage way in order to avoid any shock and harm, (on top
of a bed, a chair, a door, in a hallway...).

DO NOT place this machine in places with strong electromagnetic field,
otherwise it may be interfered by the electromagnetic wave and get damaged.

POWER SOURCE :

1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an 12V DC Adapter power supply that allows operation in
either 100/120V AC or 220/240V AC voltage area (No user adjustment is
required.)
3. Connect the AC-power cord one end to the adapter AC-input socket, the other
end to wall-outlet, then connect the DC-plug to your monitor.