Vertigo Motors COMBAT TITANIUM R Manual De Propietario página 49

BASIC ELEMENTS FOR STARTING UP THE MOTORCYCLE BASIC ELEMENTS FOR STARTING UP THE MOTORCYCLE
B
A – Map selector
B – Temperature indicator light
C – Map indicator light
D - Ignition/Stop button
You should note that when you turn off or stall the bike, on starting it up again, the map will always return to the standard
version (Map 1).
The temperature LED (B) indicates when the motorcycle is overheating.
To stop the machine, press the stop button (D).
D
A
C
SELECTING MAPS
To start up the machine, press the stop button (D) to turn on the
ECU. The LED MAP will light up and you will have 15 seconds to
start the motorbike. If not, the ECU will switch off and you will
have to repeat the process.
To choose the motorbike map (C) there are 4 different options
available:
Map 1: The standard map used by the motorcycle.
The LED will light up with a single fl ash.
Map 2: A slightly richer map than the standard one.
The LED will light up with a double fl ash.
Map 3: An even richer map.
The LED will light up with a triple fl ash.
Map 4: A lean map recommended dry for use in the moun-
tains. The LED will light up with 4 fl ashes.
49