neno Lindo Manual Del Usuario página 11

6. Time switch
7. Power/sleep button
8. Current temperature/time display
9. Reduce time/temperature; Change sterilisation mode
10. Milk heating mode
11. Food warming mode
12. Sterilisation mode
13. Bedside lamp button
05. OPERATION OF THE DEVICE
a. When the plug is inserted into the socket, the device will automatically go
to sleep.
b. Press the power button to switch the unit on or off. When switched on, the
function indicators will illuminate on the screen.
c. Only pour distilled water into the appliance. Using tap water can cause large
scale accumulations.
d. Select one of the possible functions:
• Quick heat: Pour in approximately 500ml of water, then insert the bottle
or jar of food and replace the lid. Press the quick heat function button
and set the temperature between 35°C-40°C, the default temperature is
40°C. The appliance will start the accelerated heating mode. Once heated
to the set temperature, the heater will switch off but will continue to give
off heat, so the actual temperature may differ from the set temperature
by up to ~10°C. If you want a stable heating temperature, use the milk
heating function. Check the temperature of the heated food before serv-
ing to your baby. When heating is complete, press the power button or
quick heat again to put the unit into sleep mode or unplug the steriliser.
CAUTION: This mode is not recommended for warming milk.
• Temperature maintenance: Pour between 300 and 500 ml of water,
then insert the bottle, pouch or jar of food and replace the lid. Press
the modified milk function button and set the temperature between
40°C-65°C, the default temperature is 45°C. When finished heating, press
the power button or reheat modified milk to put the unit into sleep
mode or unplug the steriliser.
• Heating the milk: Pour in between 300 and 500 ml of water, then insert
a bottle, pouch or jar of breastmilk and replace the lid. Press the milk
warming function button and set the temperature between 35°C-45°C,
the default temperature is 40°C. When finished heating, press the power
button or milk reheat button to put the unit into sleep mode or unplug
the steriliser.
• Defrosting: pour between 300 and 500 ml of water, then insert a bottle,
11