Publicidad
Idiomas disponibles
Idiomas disponibles
3. MAINTENANCE & CLEANING
After using for long a time, the dust cumulated in the dust filter or the cooling pad may
influence the inflow of air. Therefore it is recommended to clean your fan regularly.
Please follow the steps below to clean your device.
Turn off the unit and unplug the power cord before doing the cleaning and maintenance.
DUST FILTER
To remove the dust filter, first remove the screw, then simply press the locks with both
hands and pull it out. Use neutral cleaning agent and brush to clean the dust and dirts
on the filter. To attach the clean filter, place the bottom of the filter first and then push
upper part until it is locked tightly.
COOLING PAD
After removing the dust filter you can see the cooling pad. Press the lock in the middle
and gently pull out the pad. Use a clean or soft brush to remove the dust and dirt from
the pad. Rinse with water if needed and leave it to dry in open air. Never use any chemi-
cal cleaning solution that can harm the pad.
WATER TANK
Turn the water tank lock to horizontal position and pull the tank. Use soft cleaning agents
for cleaning. Wash with water and rinse. Turn the lock to vertical position.
EXTERIOR CLEANING
Clean the exterior case of the fan with a soft damp cloth except the control panel.
Never use hard cleaning agents that can harm the case. Make sure the unit is dry before
operating it.
Caution: Never let water contact with the control panel. Always clean it with a soft dry
cloth.
Publicidad
