Descargar Imprimir esta página

Phonocar VM489 Manual De Instrucciones página 8

Wi-fi camera universale

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

6
1) Camera image.
2) Recordings made.
3) W-FI Red = camera in connection.
WI-FI Green = connected camera.
WARNING: The Apple device must be renamed. Enter your smartphone settings then select "General" and then
"Info". Press "name" and change the name to: Rear Wifi Camera. In the settings select PERSONAL HOTSPOT,
activate it and enter the wi-fi password: 12345678. Then, you can customize USER and PASSWORD, through
the HOTSPOT SETTING.
Note: Remember to save your SSID and PASSWORD settings because you cannot reset the system (RESET)
or change the settings without re-entering the previously stored SSID and PASSWORD.
APP iOS
EVENT                                              
                         
Opening PHONOCAR APP                           The smartphone connects to the camera.
                                                                         
Ignition-key activation                            
Reverse gear Engagement                     
                                                                         
PHONOCAR APP in background                The smartphone keeps HOTSPOT active but to receive the rear image,
PHONOCAR APP closed                              
PHONOCAR APP reopened                         The smartphone remains in "ready to reverse gear".
OUT FROM THE VEHICLE                           
WI-FI AND HOTSPOT CONNECTIONS
The HOTSPOT function cannot be used at the same time as the WI-FI because the smartphone is supposed to
create the connection with the camera. It will therefore not be possible to connect to any Access Point, Router or
other WI-FI device during the use of the rear camera, but 3G for data transmission will remain in operation.
APP APPLE: PHONOCAR WI-FI REAR CAMERA
APP STORE: "
HOTSPOT CAMERA FUNCTION                                              
Timer Activation and switch on of the camera router                      
The WI-FI function is deactivated (if it was active).
If the connection is not yet active, the device
continues the research. If, instead, it is already connected it waits for
the engagement of the reverse gear (the APP must ALWAYS remain
open to receive images. )
The camera sends the image to smartphone.       
At the same time  static guidelines will be displayed.
it is necessary to reopen the APP, when the reverse gear is re-activated.
By completely closing the APP on your smartphone, it
continues to remain connected via HOTSPOT, and when the APP
reopens the smartphone will be ready to receive   the images.
The WI-FI function is deactivated (if activated).
The system remains on for 60 minutes after having closed the
ignition-key , so as to maintain the possibility to connect your
smartphone if it is within range of the camera (approx. 10 meters).
In this way, activation times of the system are reduced.
After 60 minutes, the system switches off.
1
4
2
3
4) Return to the previous screen.
5) Delete records.
6) HOTSPOT SETTING: It is possible
to customize USER and PASSWORD
PHONOCAR WI FI REAR CAMERA"
8
5
GB

Publicidad

loading