flammable material, such as
curtains, clothes, paper and the
like. Do not place flammable
GB
objects on top of the appliance.
26. Do not leave the appliance
unattended when in use.
Electrical safety
1. Ensure the rated voltage shown
on the rating label corresponds
with the voltage of the power
supply.
2. Do not operate any appliance
with a damaged power cord
or plug, when the appliance
malfunctions or has been
damaged in any manner.
3. Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames and
ensure that nobody can pull on
or trip over it unintentionally.
4. Do not open the housing under
any circumstances. Do not
insert fingers or foreign objects
in any opening of the appliance
and do not obstruct the air
vents.
5. Protect the appliance against
heat. Do not place close to open
flames or heat sources such as
stoves or heating appliances.
3. Operation
First use
1. Connect the power plug (3) to an electric outlet
and operate the appliance for 10-15 minutes
without any objects on it on temperature setting
4. Fumes caused by conditions of manufacturing
are released. This is normal and no reason to
worry.
2. Clean the appliance (
Functions
Knob/
Setting
indicator
1. Connect the power plug (3) to an electrical outlet.
2. Turn the knob (6) clockwise to turn the appliance
on and select the temperature. The operating
light (4) lights up.
3. When the set temperature has been reached, the
operating light (4) goes out. Place a vessel with
food on the hotplate (1).
4. When you're finished using the appliance, turn
the knob (6) completely back anticlockwise to
turn the appliance off. Remove all objects from
the hotplate (1).
5. Disconnect the power plug (3) from the electrical
outlet.
4. After use
Cleaning
•
Clean the appliance regularly to keep it in a
good and safe working condition.
•
Remove debris of food, food splatters and
spilled liquids after each use.
•
Do not clean the appliance with steel wool,
strong chemicals, alkali, abrasive or disinfecting
agents as they may damage its surface .
•
Do not immerse the appliance in water or other
liquids to clean it. Make sure that no water
enters the appliance while cleaning it.
•
Clean the body of the appliance and the
hotplate (1) with a soft damp cloth and, if
necessary, a little mild detergent. Wipe with a
dry and soft cloth.
•
The appliance may only be used again after it is
dried completely.
- 4 -
After use).
Description
Select desired
temperature setting from
1 (40°C) to 4 (110°).
Appliance off or
selected temperature
reached.
Appliance heating up.