Publicidad
Idiomas disponibles
Idiomas disponibles
Depth
control rod
Chuck
Auxiliary
handle
1. Turn the auxiliary handle clockwise to release it. The opening of
the mount will passes freely over the chuck.
2. Insert the hammer drill head through the auxiliary handle mount.
3. Insert the depth control rod
into the mount small orifice.
4. Rotate the auxiliary handle
together with its mount until is set
in the right position to operate the
tool. The auxiliary handle is
secured when the handle notches
are attached to the edge of the
gearbox.
5. Turn the auxiliary handle
to firmly set the mount
onto the hammer
drill head.
Depth
control rod
6
ENGLISH
Impact-Rotation
selector
Rotation
direction
button
Chuck
wrench
Assembly
Steps
1 & 2
Mount
3
Auxiliary
handle
Parts
Speed
control
Switch
Chuck key
holder
4
5
Handle
Continuous
operation button
Power cord
protector
Power
feed cable
Publicidad
