BenQ ScreenBar Halo Guia Del Usuario página 2

Package Contents
The package should include the following items. If anything is missing or damaged, please contact
the place of purchase immediately.
• 1 x ScreenBar Halo lamp (with USB power cord) • 1 x Accessory for curved monitors
• 1 x Wireless controller
• 1 x Pad for Ultraslim Curved Monitor
The illustrations in this guide are for your reference only and may look different from the actual
product.
Safety Warnings
• Only use the provided USB power cord with this product and connect it to the USB port power
supply (5V DC, 1.3A). Otherwise this product will not work properly and may even cause a fire.
• Do not place or hang any objects on the product, so as to avoid malfunction of the product.
• Route the USB power cord so as to avoid it from being pinched by items placed upon it or
against it.
• If the product will not be used for an extended period, please remove the USB power cord from
the USB port.
CAUTION
Assembly
1. Extend the counter weight and rest the
clip on top of the monitor. For optimal
performance, please ensure that the
mounting arm is perpendicular to the
monitor and make sure the front bezel of
ScreenBar Halo does not press against the
panel of your monitor. To mount
ScreenBar Halo on a curved monitor,
please use the accessory brick. In case it is
still unstable please use the pad with brick.
• The thickness of the monitor frame must
be within the range of 0.7 cm-6 cm (0.7 cm-
3.8 cm if the accessory for curved monitors
is used).
• You can adjust the light to a suitable angle
by rotating the lamp body.
2. Connect the USB power cord to the lamp
and insert the USB Type A connector into
the USB port.
• Do not use a USB extension cable. The use of a USB extension cable can cause lamp
misoperation.
• Use a power supply with an output voltage of 5V and a current of 1.5A or above to ensure that
the lamp can operate normally.
• If you encounter the following situations, please remove the USB power cord
from the USB port immediately, and seek support from an authorized service
agent or qualified technician:
- When the casing of this product is damaged
- When this product emits an abnormal smell
- When the LED light source flickers abnormally
- When the power cord is damaged or the wire inside is exposed
• Do not expose this product to humid environments (such as bathrooms,
outdoors) to avoid short circuits and accidents.
• This product is only suitable for indoor use, do not use it outdoors.
• It is strictly prohibited to disassemble any part or component of this product.
Otherwise it may cause an accident and invalidate the product warranty.
• 3 x AAA battery
1
2
English 1