Johnson NERVION Serie Manual De Instrucciones página 40

SAFETY INSTRUCTIONS
 Do not operate the machine in rooms with a temperature of
below 5°C. This can cause damages to parts of it. If it is
unavoidable, make sure to drain the water completely from the
appliance after every use (see "Maintenance - Cleaning of drain
pump filter") to avoid damages caused by frost.
 Never use flammable sprays or substances in the immediate
proximity of the appliance.
INSTALLATION
 Remove all packaging material and transport bolts before
using the appliance. Otherwise, serious damage may result.
 This appliance is equipped with a single inlet valve and can be
connected to the cold water supply only.
 Mains plug must be accessible after installation.
 Before washing clothes for the first time, the product shall be
operated once throughout all the procedures without any
clothes inside.
 Before using the washer dryer, the product shall be calibrated.
 Do not put any excessively heavy objects on the appliance, like
water containers or heating devices.
 The new hose-sets supplied with the appliance are to be used
and that old hose-sets should not be reused.
 Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05
MPa.
ELECTRICAL CONNECTION
 Make sure the supply cable is not trapped by the machine, it
can get damaged.
 Connect the product to a grounded outlet protected by a fuse
complying with the values in the " Technical specifications"
table. The grounding installation has to be made by a qualified
electrician. Ensure that the machine is installed in accordance
with the local regulations.
4
V .1