Descargar Imprimir esta página

Craftsman BUSHWACKER 316.715860 Manual Del Operador página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
THE ENGINE WILL NOT START
The fuel tank is empty
The primer bulb was not pressed enough
The engine is flooded
The fuel is old (over 30 days) and/or improperly mixed
The spark plug is fouled
THE ENGINE WILL NOT IDLE
The air filter is dirty
The fuel is old (over 30 days) and/or improperly mixed
The idle speed is incorrect
THE ENGINE WILL NOT ACCELERATE
The fuel is old (over 30 days) and/or improperly mixed
The cutting head is bound with grass
The air filter is dirty
THE ENGINE LACKS POWER OR STALLS WHEN CUTTING
The fuel is old (over 30 days) and/or improperly mixed
The air filter is dirty
The spark plug is fouled
NEED MORE HELP?
You'll find the answer and more on managemylife.com – for free!
Find this and all your other product manuals online.
n
Get answers from our team of home experts.
n
Get a personalized maintenance plan for your home.
n
Find information and tools to help with home projects.
n
brought to you by Sears
TROUBLESHOOTING
SOLUTION
Fill the fuel tank with properly mixed fuel
Press the primer bulb 10 times or until fuel is visible
Squeeze the throttle control and pull the starter rope until the engine
starts
Drain the fuel tank and add fresh, properly mixed fuel
Replace the spark plug
Clean or replace the air filter
Drain the fuel tank and add fresh, properly mixed fuel
Adjust the idle speed
Drain the fuel tank and add fresh, properly mixed fuel
Stop the engine and clean the cutting head
Clean or replace the air filter
Drain the fuel tank and add fresh, properly mixed fuel
Clean or replace the air filter
Replace the spark plug
17

Publicidad

loading