Jackery SolarSaga 100 Manual De Instrucciones página 4

GB GB
* DC7909 connector:
1. Open the zipper on the inside of the carrying case bag and take out the cable,
2. Connect the cable to the solar panel and the DC input port of the portable power station.
* DC7909-DC8020 Adapter:
When using the adapter
1. Open the zipper on the inside of the carrying case bag, take out the cable and connect it to the
adapter,
2. Connect the cable directly to the solar panel and the DC input port of the portable power
station.
When using the connector
1. Open the zipper on the inside of the carrying case bag, take out the cable and connect it to the
adapter,
2. Connect the two connecting cables to the two holes of the connector respectively,
3. After connecting with two solar panels, connect the connector to the DC input port of the
portable power station.
※ To maximize the power generation, adjust the orientation of SolarSaga 100 throughout the day
to ensure full exposure of the panel surface to direct sunlight.
※ The solar panel connector may be optional or standard depending on the model of each
Sun Angle Indicator
The carry handle has a sun angle indicator. When sunlight hits its surface, a shadow will appear
at its bottom.
If the shadow falls on the white inner circle at its bottom, it means that the solar panel is facing
directly towards sun and you can get optimal power generation; if not, it is suggested to adjust its
angle until it does.
02
DC7909
DC7909-DC8020
DC7909-DC8020
Solar Panel Connector
DC7909-DC8020