Probuilder 56157 Manual De Instrucciones página 19

Moisture Tester
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please
also save the manual in case you need to refer to it at a later date.
TECHNICAL DATA
Precision:
Operating temperature:
Operating humidity:
Automatic power off time:
Length of probe:
Battery:
Size:
Weight:
Wood
Construction
material
SPECIAL SAFETY INSTRUCTIONS
The appliance is not to be used by
persons (including children) with reduced
physical, sensory, or mental capabilities,
or lack of experience and knowledge
unless they have been given supervision
or instruction.
The probe is very sharp. Do not point it
at other people or leave it to children as
their toy.
This unit calibrates itself automatically
after powering on, and the probe must
not touch any subject while powering on.
Avoid damaging the unit and the probe.
Keep the device away from corrosive
liquids and electricity.
±2% mode 1
0 o C~40 o C
20%RH~90%RH
10 minutes
9.8mm
2*1.5V AAA Battery
93.5*43*24.4mm
44.8g
Mode
1
2
3
4
5
6
7
Range
6.0%~39%
7.0%~48%
8.5%~55%
9.5%~65%
0%~7.9%
0%~8.5%
0%~15.2%
A " " symbol indicates a low battery
state, which may affect the precision
of the unit. Please replace the battery
immediately.
Take out the battery if the unit is not
expected to be used for longer periods
of time.
19
Resolution
0.10%
GB