Orbis Chronos Manual Del Usuario página 51

Timing setting
This menu allows the setting of a timing on the current operating mode, expressed in
hours and days.
For further information about timings, see the chapter "Timings: what they For further information about timings, see the chapter "Timings: what they
are" on page 27). are" on page 27).
To set a timing:
1. From the normal operation display, press for a long time the key
symbol starts flashing on field
2. Press for a short time the key
symbol flashes and press the key
access the parameters modification.
3. The value of the timing currently set
flashes (00= no timing). Enter the timing
value (from 1 to 99) with the keys
and press the key
measurement unit change (hours and days).
4. The measurement unit starts flahing (hour
or day). Press the keys
choose a timing in hours (hour) or days
(day).
until the
to
and
to move to the
and to
- 15 -
CHRONOS Programmable Thermostat User Manual
until the