Magmaweld COMPACT EXPERT Serie Manual Del Usuario página 21

COMPACT EXPERT SERIES
When the Pulse welding method is selected in the METHOD menu, the modes will be as follows :
Pulse (Pulse MIG/MAG)
The classic mode will not be active in
CLASSIC MODE
the pulse method. When the Pulse
method is selected, you cannot see any
value in the classic mode. This is
because in the Pulse method, all the
settings come from the software base of
the machine and the user is not allowed
to make any adjustments.
When the D. Pulse (Double Pulse) welding method is selected in the METHOD menu, the modes will be
D.Pulse (Double Pulse)
as follows :
The classic mode is not active in the
CLASSIC MODE
Double Pulse method. When the
Double Pulse method is selected, you
cannot see any value in the classic
mode. This is because in the Double
Pulse method, all the settings come
from the software base of the machine
and the user is not allowed to make any
adjustments
When the D.Pulse option is selected, the D.Pulse parameters on pages 6 and 7 of the menu must be set.
With double pulse structure, welding process is done without deformation in the material especially in
root pass process. Double pulse provides more aesthetic welding seams.
The machine determines how long the water in the system should circulate in the torch after the machine
d) COOLING TIME
has cut off the welding process. As soon as the machine starts welding, the water circulation will start and
after the welding is completed, the water-cooling unit led will remain on during the time set in the menu.
• 1-5 min.
Setting Range
www.magmaweld.com
The settings are adjusted as in the
SMART MODE
MIG/MAG method.
The settings are adjusted as in the
SMART MODE
MIG/MAG method.
Operation
The settings are adjusted as in the
SYNERGIC MODE
MIG/MAG method.
The settings are adjusted as in the
SYNERGIC MODE
MIG/MAG method.
USER MANUAL
21
EN