Anker SOLIX PS400 Manual Del Usuario página 4

Specifications
Peak Power 400W
Rated Voltage 48V
Rated Current 8.33A
Dimension (Folded) 35.9 x 25.9 x1.9 in / 913 x 659 x 47 mm
Dimension (Unfolded) 102.0 x 35.9 x 1.2 in / 2591 x 913 x 30 mm
Weight 35.1lb / 15.9 kg
Important Safety Instructions
• Avoid dropping.
• Do not disassemble.
• For the safest and fastest charge, use original or certified cables.
• Open flame sources, such as candles, must not be placed on this
product.
• Only use a dry cloth or brush to clean this product.
Waste Electrical and Electronic Equipment (WEEE)
This symbol (with or without a solid bar) means that, according to local
laws and regulations, your product and/or its battery should be disposed
of separately from household waste. When this product reaches the
end of its life, the user has the option of handing it over to a competent
recycling organization. Proper recycling of your product will protect
human health and the environment.
Manufacture: Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
HongKong
03 EN
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation .
Warning :
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note :
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
04 EN