Ultenic U10 Manual Del Usuario página 6

Assembly
Installation of the battery pack
Insert the battery pack into the rear of the body
until you hear a "click" locking sound. (Fig. 1)
Check it goes in the right way
Installation of the dust container
First put the dust container into the hand-held
unit, and then rotate it in the direction of the
arrow until it is locked (Fig. 2)
Connection of the fl oor brush
Insert the floor brush into the metal tube until
you hear the locking sound. (Fig. 3)
Connections between the floor brush,
metal tube and handheld parts
When installing the parts onto the metal tube,
please insert the plug end of the metal tube into
the socket of the handheld component until you
hear the "click" locking sound. (Fig. 4)
Connections between the floor brush
and handheld components
Insert the floor brush into the handheld
component until you hear the "click"
lock sound. (Fig. 5)
（1）
（2）
（4）
（5）