Ultenic U10 Manual Del Usuario página 7

Connection between accessories
and handheld components
Insert the accessory into the handheld
component until you hear the "click"
lock sound. (Fig. 6)
Connection between accessories
and metal tube components
When installing the accessories onto the metal
tube, please insert it into the metal tube assembly
until you hear the "click" lock sound. (Fig. 7)
Storage of the machine
The rack is fixed on the wall, the rear part of the device is
inserted into the rack, and the accessories are inserted into
the accessory rack on the metal tube. (Fig. 8)
Note:
1. The central filter assembly that has been washed can only
be assembled and used normally after drying.
�. The central filter assembly can be washed. For optimum
cleaning performance, please dump the garbage and clean
the center filter assembly in time. Please clean the center
filter assembly after about 10 times' use. However, in order
to ensure the best performance of the machine, it is
recommended to replace the filter assembly every 3-6
months according to the machine's usage.
（6）
（7）
（8）