Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Control Switch
Using the switch located on the unit, select one of the following settings
by sliding the switch either left or right. (FIGURE 2)
I
AUTO:
This setting allows the shredder to be automatically started by inserting paper into the feed slot. Al-
ways feed the paper in as straight as possible. When the paper has passed through, the shredder
will automatically stop.
O
OFF:
This setting turns off all features of the shredder. For safety reasons, we recommend that you leave
the shredder in the "Off" position whenever the shredder is unattended or not in use.
R
REV (REVERSE):
In the unlikely event of a paper jam, the reverse setting can be used to help clear the cutters of
paper that did not pass through. Never attempt to clear a jam by using the reverse function until
you have emptied the wastebasket.
JAM REMOVER / CD DESTROYER:
The forward setting can also be used to help clear the cutters in the event of a paper jam.
This allows to manually activate the shredder into cutting mode.
FIGURE 2
CONTINUED NEXT PAGE
ENGLISH
5
Publicidad
