EN
5.4.4
FREEZING THE TIMES
Press buttons (12)
dose delivery time is locked. In addition buttons (12)
on the display. Press both buttons (12)
functions.
5.4.5
DOSE COUNTS
Press the central button (11)
• Dose 1 button (15)
• Dose 2 button (16)
• Dose 1 button (15)
continuous doses dispensed expressed in seconds;
Only the selected keys remain lit on the display or the numbers of the doses are shown
two by two in succession. For example, if the total number of doses is 142536, the
display shows 14, 25 and 36 for two seconds each.
After the last pair of digits, there is a pause for a few seconds and then the sequence
starts again.
To exit the count, press the central button (11)
5.4.6
DISPLAY BRIGHTNESS ADJUSTMENT
Press the central button for 5 seconds (11)
(13)
respectively to decrease or increase brightness. On the screen display (10)
the levels of brightness will appear from 1 to 7.
To exit the count, press the central button (11)
5.4.7
STANDBY
After 1 minute of inactivity the display will go into standby mode with only the central
button staying active (11)
. On the display the main screen will be activated.
and (13)
togheter. Once released the adjustment of the
for 5 seconds and then select one of the counts:
: access to the count of dose 1s dispensed;
: access to the count of dose 2s dispensed;
and dose 2 button (16)
. To exit the standby mode press the central button (11)
and (13 )
and (13)
again to unlock the
: access to the dose count for
.
and then select buttons (12)
.
are darkened
or
29