ADEO SCREEN ALUMID Manual De Uso página 10

ENGLISH – Motorized screen user manual
VERSION WITHOUT CASE
1) Important: make absolutely sure that the motor and the end cap of the pivot are correctly inserted into the roller, as transportation can sometimes cause them to become dislodged and to protrude
slightly from their original position.
2) Check the distance of the two side brackets mounted on the screen. Then dismantle the bracket on the side of the motor by loosening the two lateral screws, and the bracket on the pivot side after
removing the metal cotter pin to release the pivot.
3) Then mount the two brackets on the wall or ceiling at exactly the same distance previously checked, using suitable toggle bolts for the surface on which the screen is to be installed.
4) Mount the screen on the brackets by inserting the screws on the motor and pivot sides, and blocking the pivot with the metal cotter pin provided.
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Doc: ALUMID Installation Manual rev1 | 03.01.2014
Please verify that you are working with the latest revision of this document before specifying your screen.
08 COUNTERWEIGHT TENSIONING ADJUSTAMENT
Page 10