Tabla De Contenido; Meanings Of Symbols; What Is What - Tanaka TCH 22EAP Instrucciones De Manejo

English

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully understand and
observe the
warnings. Careless or improper use of the unit may
cause serious or fatal injury.
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Contents
WHAT IS WHAT? .............................................................................. 4
WARNINGS AND SAFETY INSTRUCTIONS .................................. 5
SPECIFICATIONS ............................................................................ 6
OPERATING PROCEDURES ........................................................... 6
MAINTENANCE ................................................................................ 7

WHAT IS WHAT?

Since this manual covers several models, there may be some
diff erence between these illustrations and your unit. Use the
instructions that apply to your unit.
1. Recoil starter
2. Fuel tank
3. Throttle lever lockout
4. Throttle lever
5. Front handle
6. Rear handle
7. Spark plug
8. Hand guard
9. Cutting blade
10. Air cleaner
11. Stop switch
12. Blade guard
13. Gear case
14. Choke lever
15. Lock lever
16. Priming pump
17. Blade case
18. Combi box spanner
19. Handling instructions
4
following safety precautions
17
and Always wear eye, head and ear protectors when using
this unit.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly
assembled and adjusted.
• Start the unit and check the carburetor adjustment.
See "MAINTENANCE".
1
11
3
6
4
7
TCH 22EAP (50ST), TCH 22EA (50ST)
TCH 22EBP (62ST), TCH 22EB (62ST)
TCH 22ECP (62ST), TCH 22EC (62ST)
TCH 22ECP (78ST), TCH 22EC (78ST)
18
5
16
8
14
12
10
2
15
13
19
9