Troubleshooting
Auto Door Open (ADO)
Symptom
Auto Door Open (ADO)
is not working.
When closing the
door, the other
door opens (Pair
installation).
48
English
Dacor_BRR9000M_FRE_DA68-03607A-08_EN.indd 48
• Turn on Auto Door Open switch.
(factory setting is turn off about Auto Door Open switch)
• In case of trying to open again directly after use of
refrigerator, Auto Door Open system can not working
normally.
It becomes the normal operation within 1 minute
automatically.
Try again gently after 1 minute.
• When closing the door of one refrigerator, the door of
the other refrigerator (installed in a pair) may be opened.
This occurs if the door sensor of the other refrigerator is
triggered, and is not a system failure. The opened door will
be closed in a moment by the Auto Close system.
Action
2020-12-11
4:46:41