Product Description - TTI TCB-5289 Manual De Usuario

PRODUCT DESCRIPTION

1 2
SQUELCH VOLUME
FU N
ASQ TSQ
O BE P 1 TOT
3 4
INSTRUCTIONS FOR USE
1. Manual Squelch
Turn the SQUELCH knob clockwise to the exact point where all background noise disappears. Please note
that this control is fine regulation, if you set it to the maximum (fully clockwise), the radio can only receive the
strongest signal.
2. Volume switch
a. To turn the radio on, turn the VOLUME knob clockwise
b. To increase the sound level, turn the knob further clockwise.
3. FUN key (Functions)
a. Choose band
Press and hold it for over 2 seconds to enter band selection, turn the channel knob to choose a band, press
FUN again to exit, the radio will work on selected band.
The frequency and channel information in band A to band L, VFO (1 channel), MEM (8 channels) total 12
bands can be programmed by software. The frequency in band E, UK, PL can not be programmed, but the
channel information can be changed by software. Factory Defaulted with only E, UK band, add other bands by
software if need. Pay attention to the local laws.
b. Combined Functions
Press FUN, the LCD display "FUNC", when "FUNC" disappear, press ASQ, TST, SC, A/F, MEM, DW, PRG key
to enter the function printed below the buttons.
4. Tasta ASQ
a. ASQ: Press ASQ, The LCD displays "ASQ", the ASQ function is on; press it again to turn off ASQ.
SC A F MEM DW
2 SK P 3 HI 4 NB 5
5 6 7 8
Front panel
Rear panel
14
FR Q
CH9
8
+ 1
M
PRG EXT
6
RB SE T 7 LOC K
9
10 11 12
B
18 19
ANT
EXT SP
DATA
4
15
EC HO
C H1 9
9
- 1
M
CH
16
13
Microphone
17