Magellan MiVue 320 Guia Del Usuario página 11

Operating Your Dashcam.
Turning the recorder on.
Complete the installation according to the Setting Up Your Dashcam section. Once
the vehicle engine is started, the dashcam automatically turns on.
Setting the date and time.
To make sure that the date and time of your recordings are correct, check the
settings before you begin recording.
1. Press to access the Settings menu.
2. Select System > Date / Time and press
3. Select Use GPS time or Manual:
ƒ Use GPS time sets the date and time according to the GPS location.
ƒ Manual displays the date and time setting screen.
Use /
the step until all fields have been changed. When completed, press
to adjust the value of the selected field > press
.
8
and repeat
.