Publicidad
Idiomas disponibles
Idiomas disponibles
- G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
- Stamps: Sets Coordinates or G-Sensor to be displayed on recorded video.
- Speed Stamp: Displays driving speed on recorded video.
- Text Stamp: Displays customizable text input information.
ƒ System
Allows you to change your dashcam's system settings.
- Satellites: Displays the status of GPS/GLONASS signal reception. You can
press
> select GPS or GLONASS for best signal reception.
- Date/Time: Sets system date and time. See Setting the date and time section.
- System Sound: Enables or disables system notification sounds.
- Welcome Sound: Enables or disables notification sounds during start-up.
- Volume: Adjusts the volume level.
- LCD Standby: Selects Always On to keep the LCD on or sets the timer for the
LCD to turn off automatically (10 sec, 1 min, or 3 min) after recording starts.
Selecting HUD turns off the LCD (in specified time) but still displays time and
speed information.
- Language: Sets the language.
- Distance Unit: Sets preferred distance unit.
- Storage Allocation: The system provides 3 default memory configurations to
store the videos and photos. Select a configuration based on your usage.
- Restore to Defaults: Restores system settings to factory defaults.
- Version: Displays software information.
ƒ Format
Formats memory card (all data will be erased).
14
Publicidad
