Publicidad
Idiomas disponibles
Idiomas disponibles
Installation requirements
Electrical supply and grounding
WARNING
•
AC 110-120 V / 50-60 Hz fuse or circuit
breaker is required.
•
Use an individual branch circuit specific
to the washing machine.
Do NOT use an extension cord.
•
•
Use only the power cord that comes
with the washing machine.
•
Do NOT connect the ground wire to
plastic plumbing, gas lines, or hot water
pipes.
•
Do not modify the provided plug. If it
does not fit the outlet, call a qualified
electrician to install a proper outlet.
Levelling
•
To prevent tumbling or noise, install the
washing machine on a solid, flat floor
without a platform or bricks.
•
Keep the washing machine at 10 cm
from each adjacent wall.
Water supply
•
Make sure water taps are easily
accessible.
•
Turn off the taps when the washing
machine is not in use.
•
Check for any leaks at the water hose
fittings on a regular basis.
WA750L_DC68-04048D-00_EN.indd 11
Drain
•
Make sure the drain hose is not clogged.
•
We recommend a standpipe in height
of 90-100 cm. The drain hose must be
connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
The standpipe specifications mentioned
here are only applicable to pump-type
models.
English 11
2020-12-09
5:04:46
Publicidad
