Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 3 Connect the water hose
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service
center. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
NOTE
•
After connecting the water hose to the adaptor, check if it is connected properly by
pulling the water hose downwards.
•
Use a standard type of water tap. If the tap is square-shaped or too big, remove the
spacer ring before inserting the tap into the adaptor.
WA750L_DC68-04048D-00_EN.indd 13
•
If using a screw type of water tap,
connect the water hose to the water
tap as shown.
For models with an additional hot water
inlet:
1. Connect the red end of the hot water
hose to the hot water inlet on the back
of the machine.
2. Connect the other end of the hot water
hose to the hot water tap.
NOTE
To ensure correct water usage, connect both
the hot and cold water faucets. If either or
both are not connected, the Cool (no fill) LED
will flash.
English 13
2020-12-09
5:04:46
Publicidad
