Publicidad
Idiomas disponibles
Idiomas disponibles
3. Insert the bowl cover into the notches on the upper end of the drive shaft
and turn it clockwise until it is not moving. The cover is used for covering the
bowl for short term storage of processed ingredients.
4. To attach an accessory, place it on the drive shaft and push it up slightly
and turn it clockwise until it cannot be moved. Gently pull the attachment
down to check that it is properly seated.
5. Place the ingredients that you wish to process into the bowl. Release the
lock and tilt the multi-function head to a horizontal position. After tilting
down the multifunction head, release the lock. The locked status of the
multi-function head in the tilted down work position is indicated by the lock
returning to the default position. This is accompanied by an audible click.
Disassembly
1. Use the lock to release the multi-function head and tilt it out all the way.
2. Push the attachment up and turn it counter clockwise to release it, and then
pull it out. Turn the bowl and remove it from the base unit. Remove the cover
by turning it counter clockwise and pulling it down. Move the multifunction
head back to the horizontal position.
Instructions for use
English
5
Publicidad
