Descargar Imprimir esta página

MPM MZP-01 Manual De Instrucciones página 20

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
EN
use of the device including the possible risks. Children without
supervision shall not clean nor maintain the device.
- Store the device and power cable out of reach of children under 8.
- Do not let children play with the device or accessories.
- After completing ironing drain any water left in the device.
- Under no circumstances press clothes or materials actually worn
by people or animals.
- Never direct steam to people or animals.
- Do not remove the power plug from a socket by pulling.
- Do not try to insert plug into socket using wet hands.
- Do not wind the power cable around the device until it cools
down.
- Do not place the device near electrically or gas powered stoves,
burners, ovens etc.
- The equipment was not designed for operation with external
remote time-lag switchers or a separate remote adjustment system
- If the device has a base for putting away, make sure the surface
on which the base was placed is stable.
- Before starting the device check if the available supply voltage
conforms with specification on the device's nameplate
- For the safety of children, do not leave packaging elements
freely (plastic bags, boxes, polystyrene etc.)
- WARNING Do not let children play with foil. Danger of suf-
focation.
- Place the device at least 20 cm from wall and other heat or steam
sensitive materials. Ensure a proper empty space is available on
all sides of the device for air circulation.
- Do not fill water above the MAX marking because it may result
in leak.
- Be careful during use of the device due to generation of water
vapour.
- Do not let the cable touch hot surfaces.
- Do not used the device without water. This may damage the
device.
- Do not use the device for cleaning electrical equipment nor wiring.
- Do not touch hot surfaces. Before installing or removing acces-
sories, turn the device off and wait for cooling down.
20

Publicidad

loading