Publicidad
Idiomas disponibles
Idiomas disponibles
5450100-Schrauber-man
• Avoid starting the tool up
accidentally. Make sure that the
switch is set to „OFF" before
inserting the plug in the socket. If
your finger is on the switch when
carrying the appliance or you connect
the appliance to the power supply while
it is switched on, accidents may result.
• Remove adjusting tools or
spanners before switching on the
appliance. Tools or spanners left in
rotating parts of the appliance may
cause injury.
• Do not overestimate yourself. Make
sure you are on a safe footing and
always keep your balance. That way
you can better control the appliance
in unexpected situations.
• Wear suitable clothing. Do not wear
loose-fitting clothing or jewellery.
Keep hair, clothing and gloves away
from moving parts. Loose clothing,
jewellery or long hair can get caught
in moving parts.
• If dust extracting and catching
equipment is fitted, make sure that
it is connected up and correctly
used. Use of this equipment reduces
dust hazards.
Careful handling and use of power
tools
• Do not overload the appliance. Use
for your work the power tool
intended for it. Using the correct
power tool will enable you to work
better and more safely in the
specified power range.
• Never use a power tool which has a
defective switch. A power tool which
cannot be switched on and off is
36
dangerous and must be repaired.
11.10.2005 10:34 Uhr
Seite 36
• Unplug the appliance from the
mains before adjusting it, changing
attachments or putting it aside. This
precaution ensures that the appliance
will not be started accidentally.
• Keep power tools out of the reach
of children, when they are not in
use. Do not permit persons to use
the appliance, if they are not
familiar with it or have not read
these instructions. Power tools are
dangerous, if used by inexperienced
persons.
• Look after the appliance properly.
Check that moving parts are
operating properly and are not
sticking and that no parts are
broken or so badly damaged as to
prevent the appliance from
operating properly. Have damaged
parts repaired before using the
appliance. Many accidents are
caused by badly maintained power
tools.
• Keep cutting tools sharp and clean.
Carefully maintained cutting tools
with sharp cutting edges jam less
frequently and are easier to control.
• Use power tools, accessories,
attachments, etc., in accordance
with these instructions and the
specifications for an appliance of
this particular type. Also take into
consideration the working
conditions and the work to be
done. The use of power tools for any
application other than those for which
it is intended may result in dangerous
situations.
Service
• Have your appliance repaired only
by qualified specialists and only with
Publicidad
