K. Belt adjustment button
L. Recline lever
M. 360° rotation lever
N. Isofix connectors
O. Isofix connector indicators
P. Isofix connector extraction and release buttons
Q. Top Tether
R. Top Tether Guide
CORRECT POSITION IN THE VEHICLE
40-105 cm:
This is an advanced "i-Size" Child Restraint System. It is approved un-
der Regulation No. 129/03 for use in vehicles on "i-Size compatible"
seats as indicated by the vehicle manufacturer in the vehicle users'
manual. If in doubt, consult either the child restraint manufacturer or
the vehicle manufacturer.
100-150 cm:
This is an advanced child restraint system classified as an "i-Size"
booster. It is approved under Regulation No. 129/03 for use in vehi-
cles on "i-Size compatible" seats as indicated by the vehicle manufac-
turer in the vehicle users' manual. If in doubt, consult either the child
restraint manufacturer or the vehicle manufacturer.
If the vehicle does not have an i-Size seat check the vehicle compat-
ibility list, available via the QR code on the product installation label
and at the end of this manual.
In this configuration, when using in upright position with the Isofix
connectors, this Child Restraint System may not fit in all approved
vehicles.
In this case the Enhanced Child Restraint System can be fitted using
only the vehicle belt.
INSTALLATION
Built-in safety har-
40-87 cm (rear-fac-
ness system + ISO-
ing)
FIX connectors +
Top Tether
Built-in seat belt
76-105
cm
(for-
system + ISOFIX
ward-facing)
connectors + Top
Tether
ISOFIX connectors
+ vehicle's 3-point
100-150 cm
seat belt or just the
vehicle's
seat belt
1. 40-87cm i-SIZE Universal ISOFIX rear-facing: installation
with ISOFIX connectors and Top Tether and built-in seat belt
system (see illustrations from number 4 to 17).
The reducer cushion must be used from 40 cm to 60 cm.
REDUCER CUSHION
From 40 cm to 60 cm
51
3-point