PROUSER IBC26000B Modo De Empleo página 10

Note: Depending on the condition of the battery, the charger adapts the charging currents to ensure
optimum charging of the battery. Only during the main charging phase, the battery is charged with the
maximum charging current. Shortly before the maximum charging capacity has been reached the
charging current is reduced. This ensures a gentle and best possible charging up to the battery's
maximum capacity.
10
Converts to a DC power supply for powering any 12V DC device. When selected, 13.6V LCD will
For charging 16-volt lithium iron phosphate batteries. When selected the LCD will illuminate.
19V
For charging 16 volt advanced AGM batteries that require a higher than normal charge voltage.
19V
For charging 12-volt Flooded Gel Maintenance-Free batteries.
14.4V
JUMP CHARGE = BOOST CHARGE
2.6A, 270 seconds; then 30A, 30 seconds. That means the charger charges the battery 270 seconds on the
first part to warmup the battery, then charges it 30 seconds with extremely high current to "bump' up the
battery. After that the charger will go to standby status and can be charged normally.
13.6V Power Supply
illuminate
16V LITHIUM
Press & Hold Mode
19.5A
16V AGM+
When selected the LCD will illuminate.
19.5A
12V Silent Night
5A
25-250Ah Batteries
25-250Ah Batteries
50-500Ah Batteries