Candy CST 372L-S Manual Del Usuario página 91

1. GENERAL SAFETY
RULES
This appliances is intended to
l
be used in household and
similar applications such as:
- Staff kitchen areas in shops, offices
and other working environments;
- Farm houses;
- By clients in hotels, motels and
other residential type environments;
- Bed and breakfast type environments.
A different use of this appliance
from household
or from typical housekeeping
functions, as commercial use by
expert or trained users, is excluded
even in the above applications. If
the appliance is used in a manner
inconsistent with this it may reduce
the life of the appliance and may
void the manufacturer's warranty.
Any damage to the appliance or
other damage or loss arising
through use that is not consistent
with domestic or household use
(even if located in a domestic or
household environment) shall not
be accepted by the manufacturer to
the fullest extent permitted by law.
This appliance can be used by
l
children aged from 8 years and
above and persons with reduced
physical, sensory
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
l
l
environment
l
l
l
l
l
or mental
91
in a safe way and understand the
hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
Children should be supervised
to ensure that they do not play
with the appliance.
Children of less than 3 years
should be kept away unless
continuously supervised.
If the supply cord is damaged, it
must be replaced
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Only use
supplied with the appliance for
the water supply connection
(do not reuse old hose-sets).
Water pressure must be between
0,05 MPa and 0,8 MPa.
Make sure that a carpet do not
obstruct the base of the machine
and ventilation openings.
The OFF condition is reached
by placing the reference mark on
the programmes control/knob in
the vertical position. Any other
different position of such control
sets the machine in ON condition
(only for models with programmes
knob).
by the
the hose-sets