THERM PRO TP-55 Manual De Instrucciones página 9

Touch Buttons
° C/°F: Touch once to change the temperature
°C or °F.
EN
: Touch once to turn on/off backlight.
< >
ALL TIME/24 HRs: Touch to show the maximum
and minimum temperature and humidity recorded
since last reset (ALL TIME option) or in the past
24 hours since last reset (24 HRs option). Please
note: in 24 HRs option, the maximum and minimum
temperature and humidity will be automatically
reset every 24 hours.
Touch and hold "ALL TIME/24 HRs" button for 3
seconds to reset/clear all the maximum and
minimum temperature and humidity recorded.
Backlight
Press the " "key to activate the backlight, then
press it again to turn it off. If you do not press
the button for 15 seconds, the backlight will
automatically turn off.
Temperature & Humidity Trend
1. indicates the temperature & humidity is in
an increasing trend.
2. indicates the temperature & humidity is in a
no change trend.
-16-
3. indicates the temperature & humidity is in
a decreasing trend.
Before first use
1.Insert or Replace Battery: Insert two AAA
batteries in correct polarity (+) and (-) as
indicated.
2.Do not immerse product body in water.
3.The humidity and temperature monitor is now
ready to use.
Care of your Humidity/Temeprature
monitor
Do not leave exposed to extreme high or low
temperatures since this will damage electronic
parts and plastics.
Remove battery if stored for more than four
months.
Specifications
1.Temperature range:
2.Humidity range: 10% ~ 99%.
3.Comfort display: DRY, COMFORT, WET.
4.Temperature display unit: °C °F selectable.
5.Temperature Resolution: 0.1 °C/°F.
6.Humidity Resolution:1%.
°F~ °F( °C~
-58 158 -50 70
-17-
EN
°C).