Proline BBQF2000 Manual Del Usuario página 37

1. Place the grill base on a dry, level surface.
2. Place the water tray in the grill base.
One side of the water tray has dents.
Ensure this side with dents are aligned with the
groove of the grill base.
3. Place the heating element onto the grill base.
4. Place the wire rack onto the grill base.
ASSEMBLY
Medium rack
position (deeper
dent)
Ensure the groove on the
underside of the heating
element is aligned with the
protrusion on the grill base.
If the heating element is
correctly placed onto the
grill base, a click will be
heard.
High rack position Low rack
(shallow dent) position
(deepest dent)
35