Allmatic B.RO MINI 1CH Manual Del Usuario página 15

8. TOTAL RESET OF THE DEVICE
WARNING!
Performing the reset procedure results in the deletion of all previous remote controls learned in the receiver.
This procedure allows to completely erase the radio memory of the receiver and to return the receiver to its default mode of use
(IMMEDIATE mode of use).
Power off the receiver.
Press and hold the learning button.
Turn on the receiver, the LED will turn on.
At this stage it is important not to release the learning button.
When the LED turns off you can release the learning button.
The LED will flash two times to confirm the correct execution of the procedure.
9. PRODUCT DISPOSAL
This product is an integral part of automation, and therefore must be disposed of together with it. As with installation operations, even
at the end of the life of this product, dismantling operations must be carried out by qualified personnel. This product consists of various
types of materials: some can be recycled, others must be disposed of. Find out about the recycling or disposal systems required by the
regulations in force in your territory for this category of product.
WARNING! - certain parts of the product may contain pollutants or dangerous substances which, if dispersed in the
environment, could have harmful effects on the environment and human health.
As indicated by the symbol on the side, it is forbidden to throw this product into household waste. Then perform the
"separate collection" for disposal, according to the methods provided by the regulations in force in your territory, or
return the product to the seller when buying a new equivalent product.
WARNING! - the regulations in force at local level may provide for heavy penalties in case of improper disposal of this
product.
10. WARRANTY
The manufacturer's warranty is valid from the date stamped on the product and is limited to the repair or replacement free of charge
of the parts recognized by the same as defective due to lack of essential quality in the materials or lack of processing. The warranty
does not cover damage or defects due to external agents, maintenance deficiency, overload, natural wear, choice of incorrect type,
assembly error, or other causes not attributable to the manufacturer. Tampered products will not be guaranteed or repaired. The data
given are purely indicative. No liability may be charged for reductions in scope or malfunctions due to environmental interference.
The liability of the manufacturer for damage caused to anyone by accidents of any nature caused by our defective products, are only
those that derive from the Italian law.
6-1620051M - rev.9 - 22/05/2023
R
2 x
English - 7