Publicidad
Idiomas disponibles
Idiomas disponibles
Auto Dimmer Mode
• Do not block the light sensor on the lamp. Otherwise the Auto
Dimmer Mode will not function properly.
• If the Auto Dimmer Mode is turned on, the lamp will monitor the
ambient lighting condition and dynamically adjust the brightness and
color temperature settings.
• The Auto Dimmer Mode will exit automatically and the Auto Dimmer
Mode indicator will go off when you manually adjust brightness or
color temperature.
• In circumstances where static electricity is strong, the lamp will enter the Auto Dimmer Mode
automatically as a safety measure.
Manually Adjusting Brightness and Color Temperature
If the power supply is suddenly interrupted, the light will automatically return to its settings
before the power outage when the power is restored.
• If the light was on before the power outage, it will automatically turn on when power is
restored, and memorize the brightness and color temperature before the power outage.
• If the light was off before the power outage, it will remain off when power is restored.
Maintenance and Troubleshooting
• Turn off the lamp first, and unplug the lamp from the USB port. Wipe any smears or dusts off
the lamp's outer casing using a soft, lint-free cloth lightly moistened with a mild detergent
solvent. Do not use alcohol or any other chemical solvents like kerosene, naphtha and so on, as
the lamp's casing may become damaged.
• Do not rinse the lamp or any of its components directly with water.
• If the lamp does not turn on, check to make sure that there are no loose connections between
the USB cable and USB ports.
• If the problem persists, please contact the original place of purchase for help.
2
English
Entering Auto Dimmer Mode
To enter Auto Dimmer Mode, touch the Auto Dimmer Mode button
on the lamp when the lamp is on. The Auto Dimmer Mode
indicator will light up. The Auto Dimmer Mode automatically adjusts
the lamp's brightness according to the ambient lighting condition and
optimizes the color temperature setting.
indicator
Adjusting Brightness
• When the lamp is on, touch the brightness adjustment button
on the lamp. The brightness will change each time you touch the
button. You can select from 15 brightness levels.
• You can also adjust brightness by touching and holding the
brightness adjustment button
change gradually and when it reaches your desired level, release
the button.
Adjusting Color Temperature
• When the lamp is on, touch the color temperature adjustment
button
time you touch the button. You can select from 8 color
temperature settings: 6500K (daylight), 5700K (cool white),
5000K, 4500K (neutral white), 4000K, 3500K (warm white),
3000K and 2700K (soft white).
• You can also adjust color temperature by touching and holding the
color temperature adjustment button
temperature will change gradually and when it reaches your
desired setting, release the button.
on the lamp. The color temperature will change each
Light sensor
. The lamp's brightness will
. The lamp's color
Publicidad
