IMPORTANT SAFETY REMINDERS
This cleaner should only be used for domestic cleaning, as described in this user guide.
Please ensure that this guide is fully understood before operating the appliance. Use only
attachments recommended or supplied by Hoover.
WARNING: Electricity can be extremely dangerous. This appliance is double insulated and
must not be earthed. This plug is fitted with a 13 amp fuse (UK only).
IMPORTANT: The wires in the mains power lead are coloured in accordance with the
following code:
Blue – Neutral
Brown – Live
STATIC ELECTRICITY: Some carpets can cause a small build up of static electricity. Any
static discharge is not hazardous to health.
AFTER USE: Switch the cleaner off and remove the plug from the electricity supply.
Always switch off and remove the plug before cleaning the appliance or attempting any
maintenance task.
SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with the
appliance or its controls. Please supervise the use of the appliance by older children, the
elderly or the infirm.
HOOVER SERVICE: To ensure the continued safe and efficient operation of this appliance
we recommend that any servicing or repairs are only carried out by an authorised Hoover
service engineer.
IT IS IMPORTANT THAT YOU DO NOT:
• Position the cleaner above you when cleaning the stairs.
• Use your cleaner out of doors or on any wet surface or for wet pick up.
• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar
items.
• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this
may cause risk of fire / explosion.
• Run over the supply cord when using your cleaner or remove the plug by pulling on the
supply cord.
• Stand on or wrap the power cord around arms or legs when using the cleaner.
• Use the appliance to clean people or animals.
• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged
stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised Hoover
service engineer must replace the supply cord.
Spirit_Manual ML IM.indd 1
GETTING TO KNOW YOUR CLEANER
A.
Cleaner main body
B.
Dust container
C.
Dust container front handle*
D.
Dust container top handle
E.
Dust container release button
F.
On-off / power control* slider
G.
Cleaner carry handle / cord rewind button
H.
Parking slots
I.
Exhaust filter
J.
Hose
K.
Hose release button
L.
Handle
M.
Suction control
N.
Standard tube*
O.
Telescopic tube*
P.
Telescopic tube adjuster
Q.
Carpet & floor nozzle
R.
Surface selector pedal
S.
Pre motor filter
T.
Pre motor filter mesh*
U.
2 In 1 accessory
V.
Pet hair remover mini turbo nozzle*
W.
Allergen remover mini turbo nozzle*
X.
Grand turbo nozzle*
Y.
Hard floor caresse nozzle*
(*Certain Models Only)
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release: simply press the button on the hose end and pull. [2]
2. Connect the handle to the tube upper end. [3]
3. Connect the tube lower end to the carpet and floor nozzle. [4]
1
GB
4/5/2011 11:07:14 AM