senya SYBF-CM009 Manual De Instrucciones página 29

Cafetière programmable isotherme
Ocultar thumbs Ver también para SYBF-CM009:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

coffee.
3. Do not place the coffee pot on a cold surface when hot.
4. Do not operate your coffee maker without water.
5. The coffee maker is only compatible with ground coffee. Add
only ground coffee to the coffee maker.
6. Do not dissassemble the thermal carafe.
7. Do not immerse the thermal carafe in water or any other liquid,
as water may penetrate between the walls of the carafe. When
the carafe is full of coffee, it should be kept vertical in order to
prevent leaks.
8. The lower section of the appliance and the base of the thermal
carafe become very hot when brewing coffee.
9. Use cold water only when filling the reservoir of the appliance.
10. Do not use the carafe is the handle is loose or weakened.
11. To brew several pots of coffee, allow the appliance to cool
before refilling the reservoir with cold water. Leave the coffee
machine switched off for around 5 minutes between pots.
12. Do not lift the lid of the reservoir while the coffee is brewing -
there is a risk of scalding from hot steam!
13.
2. SPECIFICATIONS
1. Enjoy your coffee with this coffee maker that can be programmed up to 24 hours in
advance
2. Thermal carafe
3. Capacity of 1.2 L
4. Aroma selector
5. LCD display
6. Automatic drip-stop system so that you can remove the coffee pot at any time
7. Stops automatically after a maximum of 5 minutes after the last cycle
8. Visible water level indicator
9. Plate to keep your coffee hot
10. Permanent and removable filter basket
11. Measuring scoop provided
12. Stainless steel finishing
13. Alimentation: 220-240V, 50/60Hz
14. Power: 800W

Publicidad

Tabla de contenido
loading

Tabla de contenido