Opsobjects OPS!SMART ACTIVE Manual De Instrucciones página 28

1. Charging instructions
Charge the device before use.
To recharge the device, insert the USB port into a
charger (5V
other end of the cable on the back of the smartwatch.
I notify:
1) Use the charger only on a flat and stable surface.
2) If there is an obstacle between the smartwatch and
the charging cable, the smartwatch may not charge properly.
3) After charging the smartwatch, disconnect the power (do not leave
the device charging for whole nights). To avoid damaging the device,
use only the supplied cable.
4) Do not use if the charging device is damaged.
5) Unplug the charging device when cleaning the smartwatch, during
1A) or PC and correctly position the
1 1 2 2
9 9 3 3
D O M 28/02
D O M 28/02
82 13.4 348
bpm 999BPM 569 26.68
6 6