Petsafe PDT19-14596 Manual De Funcionamiento página 15

STEP 4
2-Dog System
Note: If you wish to add another Receiver Collar to the training system, Add-A-Dog
Receiver Collars are available through our Customer Care Centre.
To Add Dog 2
Handheld Remote
1. Press the Spray Down Button (lower right - grey)
consecutively until "2d" appears on the Digital Display.
2. After the "2d" appears press the +2 Boost Button (red).
3. Set Dog 1 Spray Level to the desired level using the Spray Up
and Down Buttons.
4. Press the +2 Boost Button to lock the Stimulation Level for
Dog 1.
5. Set Dog 2 Spray level to the desired level using the Spray
Up and Down Buttons.
6. Press the +2 Boost Button to lock the Stimulation Level for
Dog 2.
Dog 2 Receiver Collar
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Press and hold the On/Off Button for 5 seconds.
3. The Receiver Collar will beep and the LED will fl ash.
4. On the Handheld Remote, press the Upper Right or Lower Right Button.
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact the Customer Care Centre.
Handheld Remote Functions for Dog 2 Mode
Dog 1 Tone Upper Left Button (Green)
Dog 1 Spray Lower Left Button (Purple)
Dog 1 +2 Boost Press +2 Boost Button (Red) and the Lower Left Button (Grey)
simultaneously
Dog 2 Tone Upper Right Button (Grey)
Dog 2 Spray Lower Right Button (Grey)
Dog 2 +2 Boost Press +2 Boost Button (Red) and the Lower Right Button (Grey)
simultaneously
www.petsafe.net
Extra
®
Digital Display
Tone
Spray
Charging Jack
(with cover)
Spray
Up
Spray
Down
+2 Boost
15